Zirconium Valve Manufacturer for Acid Service

WDL Valve supplies zirconium ball, butterfly, gate, globe, check, plug and discharge valves for project-specified acid and corrosive chemical service. The zirconium grade, fabrication route, trim and sealing materials are reviewed against the exact process conditions.

Why Zirconium Is Considered

Zirconium forms a protective oxide layer and can provide strong corrosion resistance in selected acid environments where common metals have limited life. Its suitability is highly dependent on chemistry, concentration, temperature, oxidizing species and trace contaminants.

Fluoride contamination and other process-specific factors can materially change performance, so alloy selection requires a complete chemical review.

Zirconium Valve Product Range

Zirconium Ball Valve for tight process isolation.
Zirconium Butterfly Valve for compact piping layouts.
Zirconium Gate Valve and Zirconium Globe Valve.
Zirconium Check Valve for reverse-flow protection.
Zirconium Plug Valve and Zirconium Discharge Valve for specialty chemical equipment.

See the related titanium and zirconium valve category.

Chemical Applications

Zirconium valves may be evaluated for acid production, fine chemicals, pharmaceuticals, specialty chemicals and process systems where corrosion rate or product contamination makes conventional alloys unsuitable. Selection should include the normal process fluid, startup, shutdown, cleaning, flushing and upset compositions.

See the Fine Chemical Processing Valves guide for broader valve-selection considerations.

Data Required Before Quotation

Complete chemical composition, concentration and impurities.
Normal, maximum, minimum and cleaning temperatures.
Operating, design and differential pressures.
Valve type, size, pressure rating and connection.
Required zirconium grade and wetted components.
Seat, packing, gasket and bolting requirements.
Fabrication, NDE, PMI and material certification scope.

Zirconium Valve FAQs

Is zirconium suitable for every acid?

No. Compatibility depends on the precise acid, concentration, temperature, contaminants and oxidizing conditions. A process review is essential.

Can zirconium be used only as trim?

It may be specified for selected wetted components, but the complete material combination and galvanic effects must be reviewed.

What should material certificates identify?

They should identify the applicable material specification, heat or batch traceability, chemical composition and required mechanical or inspection results.

Discuss Your Acid-Service Valve

Send the chemical analysis and operating conditions for a zirconium valve material and configuration review.

Request a Quote for Zirconium Valve Manufacturer

Send your valve specifications, drawings or RFQ. Our engineering team will review the operating conditions and contact you with a suitable solution.